|
Personal customers please click here to book a handyman |
||||||
|
All prices are subject to VAT @ 17.5% |
||||||
| Minimum charge including 1st half hour on site £35.00 + vat | ||||||
|
Time charged to the per half hour - payable on completion |
||||||
|
||||||
|
List of guide prices on common repairs |
||||||
| Go to job authorisation form to book Handyman South East |
parts charged cost + 10% |
|||||
|
||||||
|
Plumbing Repair & Renewal |
||||||
| Repair toilet flush | ||||||
| Fit new toilet cistern siphon as is practical & leave toilet flushing correctly | ||||||
|
Repair dripping cistern overflow |
||||||
| Repair or fit new ball valve as is practical & leave toilet working correctly | ||||||
| Repair leak toilet cistern | ||||||
| Repair leak at toilet cistern & leave water tight on completion (Cracked cisterns cannot be repaired & will need to be renewed at additional cost) |
||||||
| Fit new cistern flush handle/push button | ||||||
| Fit new lever type handle or push button to toilet cistern | ||||||
| Repair leak at pan | ||||||
| Repair leak at toilet pan & leave water tight on completion (Cracked pans cannot be repaired & will need to be renewed at additional cost) |
||||||
| Install new toilet seat | ||||||
| Fit new toilet seat | ||||||
| Install new toilet suite | ||||||
| Install complete new toilet suite & connect to existing pipework (Water supply, overflow & soil pipe connection must be within 300mm of new toilet location) |
||||||
| Repair leak at hand basin | ||||||
| Repair a leak at the hand basin as is required | ||||||
| Unblock hand basin trap | ||||||
| Unblock hand basin trap or fit new trap as is practical (If the toilet & or bath are also blocked a drain specialist may need to be contacted) |
||||||
| Install new hand basin | ||||||
| Install a complete new hand basin & connect to existing pipework (Hot, cold and waste pipes must be within 300mm of new hand basin location) |
||||||
| repair leak under the bath | ||||||
| Repair leak at the bath (The bath panel will need to be removed, if a tiled bath panel is present, we cannot guarantee tiles will not become loose, break or fall off) |
||||||
| Unblock bath trap | ||||||
| Unblock bath trap or fit new trap as is practical (If the toilet & or bath are also blocked a drain specialist may need to be contacted) (The bath panel will need to be removed, if a tiled bath panel is present, we cannot guarantee tiles will not become loose, break or fall off) |
||||||
| Repair leak at kitchen sink | ||||||
| Repair leak under the kitchen sink | ||||||
| unblock kitchen sink trap | ||||||
| Unblock bath trap or fit new trap as is practical (If the toilet & or bath are also blocked a drain specialist may need to be contacted) |
||||||
| Renew taps (kitchen, hand basin & bath) | ||||||
| Install new taps & connect to existing hot & cold pipes under the kitchen sink, hand basin or bath | ||||||
| Renew stopcock | ||||||
| Install new stopcock onto a water supply pipe (For a stopcock to be fitted onto the mains water supply the Thames Water street valve must be operable) |
||||||
| Renew washing machine valves | ||||||
| Install a new pair washing machine valves & connecting to hot & cold supply pipes (Pipes must be within 200mm of new valve location) |
||||||
| Renew exterior tap | ||||||
| Renew or fit new garden tap & connect to existing mains water supply (New tap option, water supply must be & within 3m of new tap location) (Renew tap option, existing exterior water supply must be within 300mm) |
||||||
| Leak detection & repair | ||||||
| Assess leak, detect source & provide client a guide on cost to repair (Leak repair works will be charged at £17.25 including vat per half hour) (Handyman South East do not carry out roof or central heating repairs)) |
||||||
| Repair dripping storage tank overflow | ||||||
| Repair or renew ball valve as is practical to cold water storage tank | ||||||
| Repair dripping arco pac overflow | ||||||
| Repair or renew ball valve as is practical to cold water storage tank | ||||||
|
||||||
|
Carpentry Repair & Renewal |
||||||
| Ease & adjust timber doors | ||||||
| Ease & adjust door & leave working correctly | ||||||
| Hang doors (exterior, internal, fire check etc) | ||||||
| Fit standard sized door, including fitting all ironmongery & glass as required | ||||||
| Install door locks inc furniture | ||||||
| Fit new lock & furniture (Keys to be posted to client on completion) |
||||||
| Install night latches | ||||||
| Fit standard night latch or a replacement cylinder (Keys to be posted to client on completion) |
||||||
| Install door handles - Knobs | ||||||
| Fit handles & knobs to doors | ||||||
| Install door bolts | ||||||
| Fit surface mounted door bolts | ||||||
| Install door viewer | ||||||
| Fit eyespye type door viewers to doors | ||||||
| Install hinge bolts | ||||||
| Fit surface mounted hinge bolts to doors for added security | ||||||
| Install door chain | ||||||
| Fit surface mounted door chains for added security | ||||||
| Install draught excluder's | ||||||
| Fit surface mounted draught excluder's to top & sides of door frame | ||||||
| Install door closers (concealed & overhead) | ||||||
| Fit door closers & leave shutting door correctly on completion | ||||||
| Renew sash cords | ||||||
| Fit new sash cords as required | ||||||
| Ease & adjust opening casement sashes | ||||||
| Remove of one opening casement, ease and adjust, re-hang & leave working correctly (No painting is included, all bare timber will be primed on completion) |
||||||
| Complete overhaul of sliding sash windows | ||||||
| Ease & align top & bottom sash, fit new sash cords, pre-primed parting beads, pulley wheels, pull handles, sash lifts & a Brighton type fastener (No painting is included, all bare timber will be primed on completion ) |
||||||
| Install casement stays & sash fasteners | ||||||
| Fit one casement window stay or sash fastener | ||||||
| Install sliding sash pulley wheels | ||||||
| Remove sash cord from sash, fit one sliding sash window pulley wheel & reinstate sash cord | ||||||
| Install sliding sash pull handles & sash lifts | ||||||
| Fit one pair of sash lifts or pull handles to top or bottom sash | ||||||
| Install sliding sash locks | ||||||
| Fit one pair of sash locks through meeting rails to one sliding sash window | ||||||
| Install casement window security lock | ||||||
| Fit one casement window security lock at opening sash | ||||||
|
||||||
|
Electrical Repair & Renewal |
||||||
| Install single or double sockets | ||||||
| Exchange existing socket front for new socket front | ||||||
| Install light switches | ||||||
| Exchange existing switch front for new switch front | ||||||
| Install pull cord switches | ||||||
| Exchange existing pull cord switch for new pull cord switch | ||||||
| Install fused connection units | ||||||
| Exchange existing connection unit front for new connection unit front | ||||||
| Install cooker control units | ||||||
| Exchange existing cooker control front for new cooker control front | ||||||
| Install pendant set or batten holder | ||||||
| Fit a new pendant or batten holder at existing lighting point | ||||||
| Install light fitting | ||||||
| Fit a new light fitting at existing light point | ||||||
| Install bulbs | ||||||
| Install one new bulb into existing light fitting | ||||||
| Install smoke alarm | ||||||
| Fit new battery operated smoke alarm or exchange existing 240v smoke alarm for a new mains fed smoke alarm | ||||||
| Install carbon monoxide alarm | ||||||
| Fit new battery operated C/O alarm or exchanging existing 240v C/O alarm for a new mains fed C/O alarm | ||||||
| Install exterior floodlights & lanterns | ||||||
| Exchange existing floodlight, lantern for a new exterior light | ||||||
|
||||||
|
Interior Decorating |
||||||
| Strip wallpaper from ceilings & prepare for decorating | ||||||
| Strip wallpaper, fine surface fill & generally prepare ceiling ready to decorate (Standard height rooms up to 3m high) |
||||||
| Strip wallpaper from walls & prepare for decorating | ||||||
| Strip wallpaper, fine surface fill & generally prepare all room walls ready to decorate (Standard height rooms up to 3m high) |
||||||
| Strip wallpaper to individual walls & prep for decs | ||||||
| Strip wallpaper, fine surface fill & generally prepare wall ready to decorate (Standard height rooms up to 3m high) |
||||||
| wallPaper ceilings with paintable wallpaper | ||||||
| Wallpaper ceiling with white paintable wallpapers only (Standard height rooms up to 3m high) |
||||||
| wallPaper individual walls with paintable wallpaper | ||||||
| Wallpaper wall with white paintable wallpapers only (Standard height rooms up to 3m high) |
||||||
| wallPaper all room walls with paintable wallpaper | ||||||
| Wallpaper all room walls with white paintable wallpapers only (Standard height rooms up to 3m high) |
||||||
| Paint ceilings with two coats emulsion | ||||||
| Paint ceiling with 2 coats of emulsion (Standard height rooms up to 3m high) (Newly plastered or dark coloured ceilings may require an extra coat) |
||||||
| Paint individual wall with two coats emulsion | ||||||
| Paint wall with 2 coats of emulsion (Standard height rooms up to 3m high) (Newly plastered or dark coloured walls may require an extra coat) |
||||||
| Paint all room walls with two coats emulsion | ||||||
| Paint all room walls with 2 coats of emulsion (Standard height rooms up to 3m high) (Newly plastered or dark coloured walls may require an extra coat) |
||||||
| Paint ceilings with two coats eggshell | ||||||
| Paint ceiling with 2 coats of eggshell (Standard height rooms up to 3m high) (Newly plastered or dark coloured ceilings may require an extra coat) |
||||||
| Paint individual wall with two coats eggshell | ||||||
| Paint wall with 2 coats of eggshell (Standard height rooms up to 3m high) (Newly plastered or dark coloured walls may require an extra coat) |
||||||
| Paint all room walls with two coats eggshell | ||||||
| Paint all room walls with 2 coats of eggshell (Standard height rooms up to 3m high) (Newly plastered or dark coloured walls may require an extra coat) |
||||||
| Prepare & paint casement windows upto 1800mm high | ||||||
| Prepare, touch prime, one undercoat & one gloss coat to one casement window internal face only (Standard height windows up to 1800mm high) |
||||||
| Prepare & paint Georgian casement windows upto 1800mm high | ||||||
| Prepare, touch prime, one undercoat & one gloss coat to one Georgian casement window internal face only (Standard height windows up to 1800mm high) |
||||||
| Prepare & paint sliding sash windows upto 1800mm high | ||||||
| Prepare, touch prime, one undercoat & one gloss coat to one sliding sash window internal face only (Standard height windows up to 1800mm high) |
||||||
| Prepare & paint Georgian sliding sash windows upto 1800mm high | ||||||
| Prepare, touch prime, one undercoat & one gloss coat to one Georgian sliding sash window internal face only (Standard height windows up to 1800mm high) |
||||||
| Prepare & paint doors & frames, standard height upto 1100mm wide | ||||||
| Prepare, touch prime, one undercoat & one gloss coat to one door & door frame internal faces only (Standard height doors frames up to 1100mm wide in total) |
||||||
| Prepare & paint picture rail to entire room | ||||||
| Prepare, touch prime, one undercoat & one gloss coat to picture rails (Standard depth rails up to 100mm) |
||||||
| Prepare & paint dado rails to entire room | ||||||
| Prepare, touch prime, one undercoat & one gloss coat to dado rails (Standard depth rails up to 100mm) |
||||||
| Prepare & paint skirting's | ||||||
| Prepare, touch prime, one undercoat & one gloss coat to skirting's (Standard depth rails up to 200mm) |
||||||
| Prepare & paint stair part upto a height of 1000mm | ||||||
| Prepare, touch prime, one undercoat & one gloss coat to stair parts (Standard height balustrading up to 1000mm) |
||||||
| Prepare & paint paneling & flat areas | ||||||
| Prepare, touch prime, one undercoat & one gloss coat to paneling & flat areas (Standard height rooms up to 3m) |
||||||
| remove wall tiles & prepare walls ready to re-tile | ||||||
| Remove existing wall tiles and prepare walls ready to re-tile (Standard height rooms up to 3m) (Price doesn't include removing sand & cement adhered tiles, any plastering repairs or preparation of walls for redecoration) |
||||||
| Remove existing tiles, prepare & install wall tiles upto 4mm thick | ||||||
| Removing existing wall tiles, prepare walls & install new wall tiles (standard height rooms up to 3m) (Price doesn't include removing sand & cement adhered tiles, any plastering repairs or preparation of walls for redecoration) |
||||||
| remove existing tiles, prepare & install wall tiles upto 10mm thick | ||||||
| Remove existing wall tiles, prepare walls & install new wall tiles (standard height rooms up to 3m) (Price doesn't include removing sand & cement adhered tiles, any plastering repairs or preparation of walls for redecoration) |
||||||
| Install standard wall tiling upto 4mm thick | ||||||
| Install wall tiling (Standard height rooms up to 3m) |
||||||
| Install standard wall tiling upto 10mm thick | ||||||
| Install wall tiling (Standard height rooms up to 3m) |
||||||
|
||||||
|
Exterior Maintenance & Repairs |
||||||
| Install concrete spur support post | ||||||
| Install one concrete spur post set in concrete & bolt to existing timber post for added support (Plants etc around foot of post may get damaged on installation) |
||||||
| Renew timber post to paneled fence | ||||||
| Remove defective timber post & fit new post set in concrete (We can't guarantee colour match & plants can get damaged on installation) |
||||||
| Renew timber post to feather edge fence | ||||||
| Remove defective timber post & fit new post set in concrete | ||||||
| Fit arris rail bracket to support existing rail | ||||||
| Secure existing loose arris rail to timber post with arris rail bracket | ||||||
| Renew arris rail to feather edge fence | ||||||
| Removing one defective arris rail & install new arris rail (We can't guarantee colour match & plants can get damaged on installation) |
||||||
| Renew gravel boards | ||||||
| Remove one defective gravel board & fit new gravel board (We can't guarantee colour match & plants can get damaged on installation) |
||||||
| Renew feather edge palings | ||||||
| Fit one new paling (We can't guarantee colour match & plants can get damaged on installation) |
||||||
| Renew fence panels | ||||||
| Fit one new fence panel (We can't guarantee colour match & plants can get damaged on installation) |
||||||
| Overhaul gates inc fitting ironmongery | ||||||
| Remove, ease & adjust gate, fit new hinges & a new latch & or bolts, re-hang gate & leave working correctly (Gate must be timber & hung on timber posts, timber treatment not included) |
||||||
| Fit light, medium & heavy duty tee hinges | ||||||
| Remove existing & fit one new pair of tee hinges to gate (Gate must be timber & hung on timber posts) |
||||||
| Fit light duty gate latches | ||||||
| Fit one surface mounted latch to half height gate (Gate must timber & hung on timber posts) |
||||||
| Fit Suffolk or Ring type gate latches | ||||||
| Fitg new Suffolk or Ring type latches to half or full height gate (Gate must be timber & hung on timber posts) |
||||||
| Fit shoot bolts | ||||||
| Fit surface mounted shoot bolts to gates (Gate must be timber & hung on timber posts) |
||||||
| Fit medium or heavy duty lockable pad bolts | ||||||
| Fit surface mounted pad bolt to gates (Gate must be timber & hung on timber posts) |
||||||
| Pressure washing to a maximum height of 2m | ||||||
|
Connect jet wash to clients power & exterior tap & clean areas as instructed by client |
||||||
| Spray paint black wrought iron | ||||||
| Apply one coat of Hammerite smooth black spray paint to wrought iron (Working up to a maximum height of 3m) |
||||||
|
||||||
| Go to job authorisation form to book Handyman South East | ||||||
|
|
||||||
|
All prices are subject to VAT @ 17.5% |
||||||